Blog

Home

Shelf assembly and transportation, during the buyer to know a few tips

2023-12-18 14:04

After the shelf company finishes production, it will inevitably assemble logistics vehicles. Some companies have a more urgent demand for shelves. They often transport the shelves to the factory before waiting for the shelf company to arrange logistics vehicles. This situation is not uncommon in several transactions.
Once again, the author gives you some suggestions for assembling shelves. The shelf is made of steel, with a large quantity of goods. It is obviously impractical for manual handling. Forklift trucks must be used. When forklift trucks take the shelf parts, the principles of using pallets, placing columns first, placing beams again, and placing laminates later should be followed.
This kind of discharge is the principle summed up by the old transportation master of the logistics base for many years. The reason is that the heavy parts such as upright posts are placed at the rear of the car, and the car is easy to fall back. This is to place the shelves according to the principle of heavy first and light later.
Besides, besides heavy first and light later, attention should also be paid to the need to firmly fix the shelf parts, which should not be disassembled during the assembly process, resulting in scattered shelf parts and inconvenient installation in the future.
Shelf parts are well produced, all of which are stacked layer by layer as shown in the figure, reducing space occupancy and facilitating handling. In this case, hundreds of sets of shelves often only need a few logistics vehicles can be assembled, handling completed.
The parts are placed on the logistics trolley, and the steel pallet cannot be saved. Each group of shelf parts must be equipped with a steel pallet to carry them, otherwise the forklift cannot fork and carry the parts after reaching the warehouse.
The above points are often overlooked problems in shelf assembly and handling. I hope they will be useful to everyone.

End